Navisafe Portable Navilight 360° 2NM - White w/Bendable Suction Cup Mount

Portable Navilight 360° 2NM - White w/Bendable Suction Cup Mount

The Navilight 360° 2NM - US Coast Guard approved for 2 nautical miles is the most versatile light of Navisafes range of battery operated portable navigation lights and includes a 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light and a Cabin light. It uses super bright LED light, is waterproof, floats and attaches almost anywhere through its double magnetic mounting system.

Examples of Usage:

*Based on the Convention of the International Regulations for Preventing Collisions at Sea

On a power-driven vessel underway of 12 meters or more in length but less than 50 meters in length:

• Sternlight
• All-round white light

On a power-driven vessel underway of less than 12 meters in length:

• Masthead light
• Sternlight
• All-round white light

On a power-driven vessel underway of less than 7 meters in length whose maximum speed does not exceed 7 knots:

• All-round white light

Rowing/Paddle Vessels

• All-round white light

Anchored vessels and vessels aground

• Anchor lights must always be shown from sunset to sunrise
• All-round white light

Specifications:

• USCG Approval, 2 Nautical Miles
• 5 Modes: 360° All-round light, 225° Masthead light, 135° Sternlight, Flashing light, Anchoring light, Cabin light
• Floatable, waterproof (20 m) and air-tight
• Includes magnet bracket, mounting screw, 3 lanyards for multiple fixing and securing
• Powered by three AAA batteries (not included)
• Size: H = 35 mm, Diameter = 68 mm
• Weight (net): 113 g

Modes / approximate burn time:

• 16 white LED, 360° All-round light, Anchoring light / 15hrs
• 16 white LED, 360° Flashing light / 85hrs
• 10 white LED, 225° Masthead light / 24hrs
• 6 white LED, 135° Sternlight / 32hrs
• 4 white LED, 360° Cabin light / 72hrs

Bendable Suction Mount

Designed to allow secure mounting of the Navi lights with magnetic base on any kind of smooth and flat surfaces. The quick release suction cup releases with just one push of the lever so it can be stored quickly or mounted to another place or boat.

Examples of Usage:

Navigation lights should be mounted so that they are not covered by the vessel's superstructure or may interfere with deck lights. The bendable suction mount can be easily used to mount the magnetic Navi lights at:

• The outboard engine
• The steering console, the windshield or any place on the hull where the lights are seen best
• On canoes and kayaks with a smooth and flat surface

Specifications:

• Secure suction cup base
• Quick release suction cap
• Bendable shaft moves through 180°
• Self adhering plastic mounting plate Diameter = 75mm for secure mounting on rough surfaces
• Size: L = 68mm, H = 157mm
• Weight (net): 80g