Welcome to Coastal Marine Electronics!!
Johnson Pump Accumulator Tank - ¾" Hose Barb
Product Description
Johnson Pump Accumulator Tank
The use of an accumulator tank is recommended to ensure effective and reliable system function. With an accumulator tank incorporated in the system, the intervals between cut-in and cut-out will be longer when only small amounts of water are drawn off. Less wear and tear on the pump with fewer starts and stops. Pre-pressurized at 0.8 bar / 12 psi.
Volume: 2L/0.5gal
Port connections: 3/4" hose
Height: 315mm/12.4"
Diameter; 160mm/6.3"
Weight: 1.2kg /2.7lbs
The use of an accumulator tank is recommended to ensure effective and reliable system function. With an accumulator tank incorporated in the system, the intervals between cut-in and cut-out will be longer when only small amounts of water are drawn off. Less wear and tear on the pump with fewer starts and stops. Pre-pressurized at 0.8 bar / 12 psi.
Volume: 2L/0.5gal
Port connections: 3/4" hose
Height: 315mm/12.4"
Diameter; 160mm/6.3"
Weight: 1.2kg /2.7lbs
